(Specially prepared) Acidic reverse osmosis membrane scale inhibitor (high-iron, high-aluminum, water quality special) ENK-103

1, Property and Uses
▲ Mainly targets high-speed iron and high-aluminum water, effectively controlling the iron content on the side of concentrated water to 4 ppm;
▲ Effectively controls inorganic scaling over a wide concentration range; under no acid addition, the maximum allowable LSI value is 3.0
▲ Does not aggregate with iron-aluminum oxides or silicon compounds to form insoluble substances;
▲ Suitable for reverse osmosis CA and TFC membranes, nanofiltration membranes, and ultrafiltration membranes;
▲ Excellent solubility and stability;
▲ Effective for water supply pH values ranging from 5 to 10.
2, Technical index

3. Add-on Instructions
Based on the water quality analysis report and system conditions, calculate an appropriate dosing concentration, generally 3–8 ppm, diluted 10 times with demineralized water.
4. Usage Instructions
▲ Chemicals are added before the security filter;
▲ Calibrate the actual output of the metering pump;
▲ When preparing the solution, stir thoroughly for 15–20 minutes;
▲ Regularly clean the dosing tank to prevent bacterial growth.
5 . Packaging and storage
※ Packaged in plastic drums, 25kg or 20kg plastic drums.
※ Physicochemical stability, store in a cool place with a shelf life of 2 years.
6. Safety protection
Pay attention to labor protection during operation, avoid contact with skin and eyes, and rinse thoroughly with plenty of clean water after contact.